Here’s how you can...

 Slash Your Downtime By 2+ Hours
When Your Conveyor Belt or Components
Decide To "Go" Again

"We saved time and cut our maintenance cost by
$4,757.43 on average per machine per year"
- Doug M. , Maintenance Manager, Woodbridge, ON

June 2, 2006

From the desk of:
Bill Goncz, President
Nutech Conveyor Components
 

Dear Friend,

If you're like most of the plant or line managers we've met, chances are you're continually looking for new ways to improve the productivity, reduce the downtime, yet cut costs.

To keep your production running smoothly and efficiently, no doubt you use every possible tool.

To help you even more, we've developed a unique, proprietary system called the "Belting Performance Analysis" - designed to meet conveyor and component problems head-on.

What Conveyor Problems? You May Ask...

Well, every time a belt wears out, breaks, or needs to be replaced, it's a complex, time consuming, and money-draining process.

And all the while the belt is being put on, production is halted but workers are still being paid. And as every minute, or every hour passes, a tremendous amount of money is being wasted – needlessly.

Now, let this all sink in for a moment... if your shifts are 8 hours each, and all of a sudden you cut back one of those shifts by 3 or 4 hours, what is that costing you?

Every belting company will say their conveyor belt is the best, but there is really no way to know for sure.

So Much Depends On The Maintenance!

If a machine isn't maintained, cleaned, and if the belt isn't tracked properly even the best material will shred before it's time.

The difficulty in predicting belt wear and lifespan is that it requires routine visual inspections. Sometimes inspections get done regularly, and sometimes they don't.

Often the first person to notice unusual belt wear or other problems is the line worker. But do they always report it to the line supervisor or maintenance department? Unfortunately, many times they don't. They know if the belt goes, they get to take a break for a few hours.

If this happens, even if the belt doesn't shred or break right away you risk food or product contamination and huge financial loss in addition to the loss you will suffer when the belt finally does break.

 

Test Yourself: Yes No   Were all your conveyor belts properly tracked after installation? Does your current supplier have precise measurements for each belt already on file? Does your current suppliers provide all of the belt types you require (fabric, chain, plastic, timing belts, custom timing belts)? Are your current suppliers ready to begin cutting a replacement belt at a moments notice with just a phone call? Are you generally happy with the services you are getting from your current suppliers?

If you have answered "No" at least once, you're in the right place.  So please read on...

  Introducing...

NuTech's "Belting Performance Analysis"

A Unique, Proprietary System To Slash Downtime And
To Identify Belting and Component Problems Before
They Become Too Costly to Fix

We've spent a considerable amount of time and money to develop this valuable system. It is specifically designed to meet conveyor component problems head-on.

Here's a brief summary of what we'll do for you:

• First, we'll setup a time to come out to your plant and do a quick walk-through with your maintenance staff to determine how long it will take to do the analysis.

• Then we'll schedule a day and time to do the analysis – when production is down.

• At the scheduled day and time, we'll come out to your plant and do a complete, systematic plant survey.

• We'll talk to the production staff and maintenance staff to see what challenges they may have.

• We'll identify and tag every machine with a unique number.

• We'll record the precise measurements of every belt in your plant.

• For every machine or conveyor in your plant, we'll record the line number, the machine number, splicing type, lifespan, last time ordered, issues identified, recommendations, product conveyed, mechanical issues, and other critical information.

• We'll inspect each piece of equipment to identify what maintenance or cleaning is necessary.

• We'll check the tracking of every belt in your plant.

• Then we'll compile all of the information and data we collect into a report of findings and recommendations.

Finally, we'll meet with you and present our findings and recommendations along with a binder with all of the data, recommendations, belt specifications, photographs, and belt samples.

All of this will be done on a scheduled day, evening, or night outside your regular production time so we won't disturb your schedule.

And the result of the "Belting Performance Analysis" is that you'll have a heads-up on what needs to be done now to extend the lifetime of your belts, and how to keep your downtime to the absolute minimum.

Picture yourself having all the power because you have our information, expertise, and support at your fingertips. When you need a belt right away, all you have to do is call us and say "I need a belt for machine #58" and we'll start cutting it immediately.  No need for us to send someone first, we already have the exact measurements on file.

Here is Just a Small Portion of the
Benefits You Will Gain

• You'll have a "belting scorecard" for every piece of equipment in your facility. This will show you exactly which machines will require maintenance – and how soon. This will help you plan for maintenance and avoid costly unscheduled downtime.

• Complete recommendations on materials that should be used for every belt on the shop floor. It is extremely important to use the correct belt material based on the equipment itself and what the belt is being used for. Choosing the right material will produce the highest cost savings over time.

• We could arrange to come out to your facility a set number times per month or per year for a checkup. This is why we can guarantee our work.

• We'll carefully and systematically check and compile lists of defective and worn out parts.

• We'll check working surfaces.

• We'll run a complete operational check.

• We will provide a complete a list of equipment & conveyors.

• We will do a condition assessment of your belting and of all the moving components of your machinery.

• We will list potential issues and provide our recommendations.

• And finally, we will create and exhaustive checklist for each piece of equipment capturing all of the important information, including exact belt lengths, material recommendations, etc.

It's Not Enough To Get It Done; You Need To Get It Done Right! "When most other belting companies come out to replace a belt, that's all they do: They just 'cook on' the belt and leave the tracking to your maintenance people," say Bill Goncz. "Our service is the best there is. When we replace a belt, we cut it to the exact measurements we have on file, we cook it on, and before we leave we clean up the rollers, clean up the gunk underneath the belt, track it, and make sure it runs properly." "We'll check all other moving components, such as bearings, motors, and gear boxes. We don't leave until we're sure there won't be another problem." "This will give you huge savings in time and labour costs, as well as peace of mind for you. If you have a small staff, they don't have to be experts in tracking – we'll do it for them, the right way."

NuTech's "Belting Performance Analysis" will help you:

• Avoid lost time and wasted effort;

• Increase your work output / line output;

• Know exactly what you must do when things go wrong;

• Delegate and monitor your conveyor components;

• Have less people to keep in mind if something goes wrong;

• Reduce paperwork;

• Reduce phone calls;

• Eliminate unnecessary mess-ups.

We'll help you get it done right – the first time. In the case the unscheduled downtime does happen, we'll already have the exact measurements and material recommendations on file.  Just a quick telephone call and we will immediately start cutting a new belt or deliver a custom pre-made belt we have in stock.

Now keep in mind… we could easily charge from $597 to $3,297.00 for this valuable service, depending on the size of your plant. 

So why are we giving it away for FREE, no strings attached whatsoever?

Here's why: We are so confident that by using our "Belting Performance Analysis" you will see a significant reduction in downtime, you will trust us to make your next conveyor belt.

Not only will our belts and services save you money in the long run, unlike our competitors, we will guarantee every belt we put in place and how long it's going to run.

To get more details, simply call us at 1-877-639-2358 and a highly trained conveyor expert in our office will be happy to answer all your questions. Or simply click on the button below to book your Belting Performance Analysis.

Respectfully yours,

Bill Goncz, President
NuTech Conveyor Components Inc.
tel.: 1-877-639-2358

P.S.:  Even if you already have a supplier you are pleased with, it's still a good idea to have someone standing by, ready to jump in at a moments notice. Either way, you'll like the speed and convenience of our system. And there is no cost or obligation, so you have nothing to lose... and so much to gain. That's a personal promise you can take to the bank.

P.P.S.:  If you continue to work out the same way, you're going to get the same results. What I'm offering you is the easiest, most risk-free way to try our system so you can see for yourself how you can run your production more efficiently, and how you are guaranteed to cut costs.

P.P.P.S: Click here if you decided NOT to book your Belting Performance Analysis right now.