GRAVITY ROLLER CONVEYORS |
| |
MODEL 1011 50# CAP CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.0” DIA., 11 GA. ROLLER |
|
|
Rollers: 1.0” dia., 11 ga. wall tubes with 1/4” round cold rolled steel axles, spring retained. Standard A05 bearings are light oil lubricated. 50 lbs. roller capacity.
Frames: Standard F99 set high 2-1/2” x 1-1/2” x 3/16” formed steel angles with bolted 1-1/8” x 1/8” angle crossties.
Widths: Standard widths are listed in table. Available from 6” to 22” between frames.
Lengths: Standard 5’ and 10’ sections. Also available in 1” increments from 24” to 120”.
Frame Capacity: 130 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 775 lbs. maximum evenly distributed live load with supports on 5’ centers.
Guard Rail: Standard G99: No guard rail.
Roller Covers: Standard V98: No roller cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
| |
MODEL 1416 290# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.375" DIA., 16 GA. ROLLER WITH 7/16' AXLES |
|
|
Rollers: 1.375” dia., 16 ga. wall galvanized tubes with 7/16” round cold rolled steel axles, spring retained. Standard A03 bearings are light oil lubricated. 290 lbs. roller capacity.
Frames: F93 set high 3” x 1-1/2” x 3/16” formed steel angles with bolted 1-1/8” x 1/8” angle crossties.
Couplings: 3/8 diameter rod on one end, mating hooks on opposite end.
Widths: Standard widths are listed in table. Available from 6” to 39” between frames.
Lengths: Standard 5’ and 10’ sections. Also available in 1” increments from 24” to 120”.
Frame Capacity: 1300 lbs. evenly distributed live load per section with supports on 10’ centers; 3200 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98: No roller cover.
Finish: Standard PP94: Safety blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 1418 50# CAP CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.375” DIA., 18 GA. ROLLER |
|
|
Rollers: 1.375” dia., 18 ga. wall galvanized tubes with 1/4” round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs. roller capacity.
Frames: Standard F98 set high 2-1/2” x 1” x 12” galvanized formed steel channels with bolted 1” x 1-1/8” angle crossties.
Couplings: 3/8 diameter rod on one end, mating hooks on opposite end.
Widths: Standard widths are listed in table. Available from 6” to 22” between frames.
Lengths: Standard 5’ and 10’ sections. Also available in 1” increments from 24” to 120”.
Frame Capacity: 350 lbs. evenly distributed live load per section with supports on 10’ centers; 900 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98: No roller cover.
Finish: Standard PP97: Galvanized |
| |
|
| |
|
MODEL 1916 250# CAP CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.9” DIA., 16 GA. ROLLER |
|
|
Rollers: 1.9” dia., 16 ga. wall tubes with 7/16” hex cold rolled steel axles, spring retained. Standard A10 bearings are light oil lubricated. 250 lbs. roller capacity.
Frames: Standard F97 set high 3-1/2” x 1-1/2” x 1/8” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard both ends of channel.
Widths: Standard widths are listed in table. Available from 6” to 51” between frames.
Lengths: Standard 5’ and 10’ sections. Also available in 1” increments from 24” to 120”.
Frame Capacity: 1300 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 3,200 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98: No roller cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 1912 260# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.9" DIA., 12 GA. ROLLER |
|
|
Rollers: 1.9” dia., 12 ga. wall tubes with 7/16” hex cold rolled steel axles, spring retained. Standard A20 bearings are light oil lubricated. 260 lbs. roller capacity.
Frames: Standard F97 set high 3-1/2” x 1-1/2” x 1/8” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard, both ends of channel.
Widths: Standard widths are listed in table. Also available from 6” to 51” between frames.
Frame Capacity: 1300 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 3,200 lbs. maximum evenly distributed live load with supports on 5’ centers.
Guard Rail: Standard G99: No guard rail.
Roller Covers: Standard V98 : No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 1909 300# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 1.9" DIA., 9 GA. ROLLER |
|
|
Rollers: 1.9” dia., 9 ga. wall tubes with 7/16” hex cold rolled steel axles, spring retained. Standard A30 bearings are light oil lubricated. 300 lbs. roller capacity.
Frames: Standard F97 set high 3-1/2” x 1-1/2” x 1/8” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard, both ends of channel.
Widths: Standard widths are listed in table. Available from 6” to 51” between frames.
Lengths: Standard 5’ and 10’. Also available In 1” increments from 24” to 120”.
Frame Capacity: 1300 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 3,200 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98: No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 2514 290# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 2.5" DIA., 14 GA. ROLLER |
|
|
Rollers: 2.5” dia., 14 ga. wall tubes with 7/16” hex cold rolled steel axle, spring retained. Standard A40 bearings are light oil lubricated. 290 lbs. roller capacity.
Frames: F97 set high 3-1/2” x 1-1/2” x 1/8” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard both ends of channel.
Widths: Standard widths are listed in table. Also available from 6” to 51” between frames.
Lengths: Standard 5’ and 10’. Also available in 1” increments from 24” to 120”.
Frame Capacity: 1300 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 3,200 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98; No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 2511 750# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 2.5" DIA., 11 GA. ROLLER |
|
|
Rollers: 2.5” dia., 11 ga. wall tubes with 11/16” hex cold rolled steel axle, spring retained. Standard A50 bearings are light oil lubricated. 750 lbs. roller capacity.
Frames: F96 set high 4” x 1-1/2” x 3/16” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard both ends of channel.
Widths: Standard widths are listed in table. Also available from 6” to 61” between frames. Lengths: Standard 5’ and 10’. Also available in 1” increments from 24” to 120”.
Frame Capacity: 3750 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 8,000 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98; No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 2607 750# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 2.625" DIA., 7 GA. ROLLER |
|
|
Rollers: 2.625” dia., 7 ga. wall tubes with 11/16” hex cold rolled steel axles, spring retained. Standard A50 bearings are light oil lubricated. 750 lbs. roller capacity.
Frames: F96 set high 4” x 1-1/2” x 3/16” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.
Couplings: Bolted butt couplers standard both ends of
channel.
Widths: Standard widths are listed in table. Also available from 6” to 61” between frames.
Lengths: Standard 5’ and 10’. Also available in 1” increments from 24” to 120”.
Frame Capacity: 3750 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 8,000 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98; No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 3509 750# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 3.5" DIA., 9 GA. ROLLER |
|
|
Rollers: 3.5” dia., 9 ga. wall tubes with 11/16” hex cold rolled steel axles, spring retained. Standard A70 bearings are light oil lubricated. 750 lbs. roller capacity.
Frames: Standard F94 set high 4” at 5.4 lbs. structural steel channels with welded 1-1/2 x 3/16” structural angle crossties.
Couplings: Welded 1/4” plate butt couplers standard both ends of channel.
Widths: Standard widths are listed in table. Also available from 6” to 61” between frames.
Lengths: Standard 5’ and 10’. Also available in 1” increments from 24” to 120”.
Frame Capacity: 3750 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 8,000 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98; No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
MODEL 3530 2000# CAPACITY ROLLERS
GRAVITY ROLLER CONVEYOR 3.5" DIA., 0.300 WALL ROLLERS |
|
|
Rollers: 3.5” dia., .300” wall tubes with 1” hex cold rolled steel axles, cotter pin retained. Standard A80 bearings are grease lubricated. Double Shielded. 2000 lbs. roller capacity.
Frames: Standard F95 set high 5” at 6.7 lbs. structural steel channels with welded 2 x 1/4 structural angle crossties.
Couplings: Welded 1/4” plate butt couplers standard both ends of channel.
Widths: Standard widths are listed in table. Also available from 6” to 90” between frames. Roller capacity is reduced above 61” between frames.
Lengths: Standard 5’ and 10’. Also available in 1” increments from 24” to 120”.
Frame Capacity: 11,000 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 22,000 lbs. maximum evenly distributed live load with supports on 5’ centers.
Roller Covers: Standard V98; No roll cover.
Finish: Standard PP94: Safety Blue, Epoxy Powder Coat. |
| |
|
| |
|
| |
|
