Chain Driven Tapered Roller Curve – Model CDTRC
Model CDRC26 is a chain driven live roller curve conveyor commonly used with CDLR26. It offers a positive drive for negotiating 90, 45, and 30 degree turns. The heavy wall rollers are well suited for loaded pallets, drums, and containers in rugged industrial applications.
Effective Widths: 36″, 42″, 48″, 54″, 60″
Degrees: 45°, 90°
Beginning Elevation: 6.75″ – 120″
Ending Elevation: 6.75″ – 120″
Speed: 10 – 120 FPM
Rollers: 2-1/2″ diameter at sprocket end. Roller diameter increases across width to provide true taper. 12ga wall tube with 11/16″ hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.
Drive: Standard drive is mounted high near center of conveyor length on chainbox side. Optional drives include drive mounted low or drive mounted below and within, near center.
Frame: Standard frame includes 7” channel on chain box side and 5” channel on opposite side with roller set high in frame. Optional frame includes 8″ channel on chain box side and 6″ channel on opposite side with roller set high in frame.
Motor: 3/4 HP through 2 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
Roll Covers: Standard roller surface is carbon steel.
Supports Centers: Standard supports are floor supports on 10’ center.
Frame Finish: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.