IPS Soft Drop Mold Chutes

IPS Soft Drop Mold Chutes

Prevent your molded products from damage with our soft drop mold chutes.  Quickly and easily attaches to your molds with rare earth magnets.

Description

Soft Drop Mold Chutes

IPS Soft Drop Mold Chutes stop your parts from scattering randomly in the “drop zone”. Mold Chutes ensure your parts land on your conveyor or in your packing case and not on the floor.

Soft Drop Mold Chutes are made of durable plastic with a PVC lining in the bottom to protect even the most delicate molding. The unique construction will  not absorb oil or grease and is abrasion, puncture, and tear resistant. Each Mold Chute is easily cleaned using simple household cleaners and there are no concertina folds to trap moldings or dirt.

The unique design of the soft drop mold chute lets it attach under the mold. As the mold opens your delicate parts fall gently into the Soft Drop chute and are slowly transferred on to the conveyor. Soft Drop chutes are designed for applications where delicate parts need to be transferred from your mold to your conveyor without scratching or marking them. In applications where you have multi cavity molds soft Drop chutes can be designed to keep parts separated further reducing damage. All Soft Drop Chutes can be attached to the machine using either magnets or custom support harnesses. Velcro straps allow precise adjustment of the chute to prevent loss of parts from uncontrolled ejections.

Mold Chute Features and benefits

*  Reduces Scrap
*  Eliminates Contamination
*  Increases Profits
*  Easy Installation
*  Quick Access to the Mold
*  Movable to Other Presses

       $ Call for Pricing

Mold Chutes are easy to install and remove, with some assembly of hardware required. Each Kit contains 1 Mold Chute, mounting hardware, and the required number of attaching magnets for the model of Chute

For special application information and pricing, please complete this form and fax it to us at (905) 876-9313.
Custom Softdrop chute

IPS STANDARD RIGHT ANGLE SOFT-DROP SHUTES TECHNICAL SPECIFICATION

Model Mold Width A Chute Height B Chute Length C Mold Open D
SD-25 10″ – 25 cm 22″ – 56 cm 24″ – 61 cm 14″ – 35 cm
SD-30 11″ – 28 cm 23″ – 58 cm 26″ – 66 cm 16″ – 40 cm
SD-35 12″ – 30 cm 24″ – 61 cm 28″ – 71 cm 18″ – 46 cm
SD-40 13″ – 33 cm 25″ – 63 cm 30″ – 76 cm 20″ – 51 cm
SD-45 14″ – 35 cm 26″ – 66 cm 32″ – 81 cm 22″ – 56 cm
SD-50 16″ – 40 cm 27″ – 69 cm 34″ – 86 cm 24″ – 61 cm
SD-55 18″ – 46 cm 28″ – 71 cm 36″ – 91 cm 26″ – 66 cm
SD-60 20″ – 51 cm 29″ – 74 cm 38″ – 96 cm 28″ – 71 cm
SD-65 22″ – 56 cm 30″ – 76 cm 40″ – 102 cm 30″ – 76 cm
SD-70 24″ – 61 cm 31″ – 79 cm 42″ – 107 cm 32″ – 81 cm
SD-75 26″ – 66 cm 32″ – 81 cm 44″ – 112 cm 34″ – 86 cm
SD-80 28″ – 71 cm 33″ – 84 cm 46″ – 117 cm 36″ – 91 cm
SD-85 30″ – 76 cm 34″ – 86 cm 48″ – 112 cm 38″ – 96 cm
SD-90 32″ – 81 cm 35″ – 89 cm 50″ – 127 cm 40″ – 102 cm
SD-95 34″ – 86 cm 36″ – 91 cm 52″ – 132 cm 42″ – 107 cm
SD-100 36″ – 91 cm 37″ – 94 cm 56″ – 142 cm 44″ – 112 cm
SD-105 38″ – 96 cm 38″ – 96 cm 60″ – 152 cm 46″ – 117 cm
Minimum Conveyor Width E=D+1″

IPS STANDARD IN-LINE SOFT-DROP CHUTES TECHNICAL SPECIFICATION

Model Mold Width A Chute Height B Chute Length C Mold Open D
SD-25 14″ – 35 cm 22″ – 56 cm 24″ – 61 cm 10″ – 25 cm
SD-30 16″ – 40 cm 23″ – 58 cm 26″ – 66 cm 11″ – 28 cm
SD-35 18″ – 46 cm 24″ – 61 cm 28″ – 71 cm 12″ – 30 cm
SD-40 20″ – 51 cm 25″ – 63 cm 30″ – 76 cm 13″ – 33 cm
SD-45 22″ – 56 cm 26″ – 66 cm 32″ – 81 cm 14″ – 35 cm
SD-50 24″ – 61 cm 27″ – 69 cm 34″ – 86 cm 16″ – 40 cm
SD-55 26″ – 66 cm 28″ – 71 cm 36″ – 91 cm 18″ – 46 cm
SD-60 28″ – 71 cm 29″ – 74 cm 38″ – 96 cm 20″ – 51 cm
SD-65 30″ – 76 cm 30″ – 76 cm 40″ – 102 cm 22″ – 56 cm
SD-70 32″ – 81 cm 31″ – 79 cm 42″ – 107 cm 24″ – 61 cm
SD-75 34″ – 86 cm 32″ – 81 cm 44″ – 112 cm 26″ – 66 cm
SD-80 36″ – 91 cm 33″ – 84 cm 46″ – 117 cm 28″ – 71 cm
SD-85 38″ – 96 cm 34″ – 86 cm 48″ – 122 cm 30″ – 76 cm
SD-90 40″ – 102 cm 35″ – 89 cm 50″ – 127 cm 32″ – 81 cm
SD-95 42″ – 107 cm 36″ – 91 cm 52″ – 132 cm 34″ – 86 cm
SD-100 44″ – 112 cm 37″ – 94 cm 56″ – 142 cm 36″ – 91 cm
SD-105 46″ – 117 cm 38″ – 96 cm 60″ – 152 cm 38″ – 96 cm
Minimum Conveyor Width E=A+1″

Reviews

There are no reviews yet.

Be the first to review “IPS Soft Drop Mold Chutes”







captcha

Get a Free no obligation Quote