Gravity Roller Curve Conveyor – Model 1912C

Gravity Roller Curve Conveyor – Model 1912C

Gravity roller curve conveyors are used to move flat bottomed products around curves. Straight 1.9″ diameter rollers make this a cost effective method


Gravity Roller Curve Conveyor – Model 1912C

Rollers: 1.9” dia., 12 ga. wall tubes with 7/16” hex cold rolled steel axles, spring retained. Standard A20 bearings are light oil lubricated. 260 lbs. roller capacity.

Frames: Standard FC97 set high 3-1/2” x 1-1/2” x 1/8” formed steel channels with bolted 2” x 3/16” galvanized angle crossties.

Couplings: Bolted butt couplers standard both ends of channel.

Widths: Standard widths are listed in table. Available from 6” to 51” between frames.

Frame Capacity: 1300 lbs. evenly distributed live load per 10’ section with supports on 10’ centers; 3,200 lbs. maximum evenly distributed live load with supports on 5’ centers.

Guard Rail: Standard G99: No guard rail.

Roller Covers: Standard V98: No roller cover.

Finish: Standard PP94: Safety Blue, Epoxy Powder Coat.

Get a Free no obligation Quote