PTFE Skived Tape (360 Series)

PTFE Skived Tape (360 Series)

PTFE Skived Tape (360 Series) has exceptional electrical properties for wire and cable insulation and protection


PTFE Skived Tape (360 Series)

DuraStick® Skived PTFE Film Tapes are the most conformable and have the highest elongation of any PTFE tape produced by AFC. These tapes are manufactured by applying a silicone adhesive* to a skived PTFE film and are excellent for use in applications where stretch or conformity is desired. Pure PTFE film tapes, such as these, exhibit the best chemical, fire and weathering resistance of any tape manufactured by AFC. In addition, these tapes have exceptional electrical properties and are ideal for wire and cable insulation and protection.

*Acrylic adhesive is available upon special request.

DuraStick® Skived PTFE Film Tape Characteristics

DuraStick® Skived PTFE Tapes are engineered to retain the distinctive properties of PTFE; however, by adding an adhesive to one side, the need for mechanical fastening is eliminated. These tapes offer high elongation (up to 300%), and provide an excellent surface when the dimensional stability and pressure resistance of coated fabric is not required. DuraStick® Skived PTFE Tapes conform to Mil Spec I-23594C Type I, have received USDA approval for food processing and handling, are FDA compliant (21 CFR177.1550), and are suitable for applications with operating temperatures ranging from -100°F to 500°F (-73°C to 260°C).

Typical Applications


Food Processing:
Work surface covering
Tray liners

Printing and Textiles:
Non-stick roll coverings

Building Products:
Vinyl window manufacturing

Chemical Processing:
Tank seals and contaminant
Gaskets, membranes, seals &
Corrosion resistant chute, drum,
and hopper liners
Lining of spray booths
Guide rails

Aerospace, Communications
& Military:
Composite mold release/bonding
Vacuum bagging

Pulp and Paper:
Non-stick roll coverings

Commutator insulation
Slot liners, spacers, field and
armature winding
Wire and cable insulation and protection

Other Applications:
Work surface covering
Heat sealing bars and jaws

Additional applications exist. Contact AFC for more specific information.

Styles Available



Nominal Thickness (Substrate)

Nominal Thickness (Adhesive)

(oz./in. of width)

Tensile Strength
(lbs/sq in)



Maximum Operating

Full Width

Slit Roll Lengths

360-03A* Acrylic 0.003″ 0.0015″ 30 18 300 11,000 350°F (177°C) 20 36
360-05A* Acrylic 0.005″ 0.0015″ 30 30 300 14,000 350°F (177°C) 20 36
360-010A* Acrylic 0.010″ 0.0015″ 35 60 300 20,000 350°F (177°C) 20 36
360-03S Silicone 0.003″ 0.003″ 40 18 300 11,000 500°F (260°C) 20 36
360-05S Silicone 0.005″ 0.003″ 40 30 300 14,000 500°F (260°C) 20 36
360-010S Silicone 0.010″ 0.003″ 55 60 300 20,000 500°F (260°C) 20 36

Please note: Additional thicknesses and styles available upon special order.

Disclaimer: AFC measures tensile strength according to ASTM D828 and adhesion according to D 3654/D 3654M. The figures above are averages and actual results will vary.

Get a Free no obligation Quote